Smt I-pulse K01 nozzle used in pick and place machine Smt I-pulse K01 nozzle used in pick and place machine I-pulse series nozzles: 1.M1/M4 type:M001/M002/M003/M004/M005/M006/M012/M013/M017/M018/M019/M020/M021/M022/M031/M032/M033 2.M2 type:N001/N00
Smt Hitachi nozzles sigma-G4 Sigma-G5 nozzles used in pick and place machine Hitachi GXH-1, GXH-3 Nozzles Part Number Description 630 128 4842 (#101) HA01 0.7x0.4/ø0.25 (for 0603) 630 132 2322 (#111) PV01 1.1x0.6/ø0.38 (for
Electronics Forum | Fri May 23 18:55:20 EDT 2008 | gregoryyork
This is one of the biggest mistakes with the Lead Free process. We have all listened to the 'industry experts' and followed their advice and unfortunately got it wrong. Keep the dwell times (dependant on alloy selection) the same as Leaded so you are
Electronics Forum | Mon Jan 17 17:38:29 EST 2011 | bandjwet
All: I am reaching out to get some suggestions on the right flux to use as well as a recommended cleaning process for soldering a KOVAR RF shield using 80/20 Au/Sn solder to a ceramic hybrid. The recommended profile is 4-5 min at 280C and at least
Used SMT Equipment | Pick and Place/Feeders
Universal Instruments 4685A GSM Placement Machine Very Low Cycle Counter only 5,982,473 cycles UPS 4.5.0e Software Four Spindle C4 Head Two FlexHead Nozzle Changers 4.0mil Upward Looking Camera on Front 3.0mil Upwa
Industry News | 2020-07-14 16:20:59.0
The Surface Mount Technology Association (SMTA) and the Center for Advanced Life Cycle Engineering (CALCE) today announced that its annual Symposium on Counterfeit Parts and Materials will proceed for 2020 as a completely virtual event starting August 4, 2020 and ending August 6, 2020. The decision has been made in light of the COVID-19 pandemic to ensure the health and safety of all those who attend.
Industry News | 2018-05-15 07:26:27.0
Fueled by strong growth in electric vehicles and autonomous cars, and a dramatic increase in electronics content in conventional automobiles and trucks, automotive electronics are crucial components of engine, ignition, and transmission management; entertainment, navigation, diagnostic tools and safety systems. IPC – Association Connecting Electronics Industries has gathered thought leaders and subject matter experts from leading electronics and automotive companies to discuss the future of automotive electronics design and manufacturing at “IPC Automotive Electronics Reliability Forum,” June 4-5 in Nuremberg, Germany.
Parts & Supplies | Other Equipment
Juki KE2050, KE2060, FX-1, FX-3 P/N: E3665X-729-0A0 Des: Nozzle,#500 (0.5×1.0) P/N: #501 Des: Nozzle,#501 (0.7×0.4 / 0.25 Holes) P/N: #502 Des: Nozzle,#502 (0.7/0.35) P/N: #503 Des: Nozzle,#503 (1.0/0.6) P/N: E3656-729-0A0 Des: No
Parts & Supplies | SMT Equipment
QUALITY OEM MIRAE AND I PULSE SMT NOZZLES Full series are available,few are listed below: Machine Mirae Machine Mirae MX-310,MX-240,MX-110,MPS-1010,MPS-1020,MPS-1025 P/N: A (1005) Des: Nozzle,ø0.65/ø0.38 P/N: A+B (1005~1608) Des: No
Technical Library | 2020-10-14 14:49:14.0
In this study, the modification of an epoxy matrix with different amounts of cube-like and rod-like CaCO3 nanoparticles was investigated. The effects of variations in the morphology of CaCO3 on the mechanical properties and thermal stability of the CaCO3/epoxy composites were studied. The rod-like CaCO3/epoxy composites (EP-rod) showed a higher degradation temperature (4.5 _C) than neat epoxy. The results showed that the mechanical properties, such as the flexural strength, flexural modulus, and fracture toughness of the epoxy composites with CaCO3 were enhanced by the addition of cube-like and rod-like CaCO3 nanoparticles. Moreover, the mechanical properties of the composites were enhanced by increasing the amount of CaCO3 added but decreased when the filler content reached 2%. The fracture toughness Kic and fracture energy release rate Gic of cube-like and rod-like CaCO3/epoxy composites (0.85/0.74 MPa m1/2 and 318.7/229.5 J m
Technical Library | 2022-09-12 14:07:47.0
Unique component handling issues can arise when an assembly factory uses highly-moisture sensitive surface mount devices (SMDs). This work describes how the distribution of moisture within the molded plastic body of a SMD is an important variable for survivability. JEDEC/IPC [1] moisture level rated packages classified as Levels 4-5a are shown to require additional handling constraints beyond the typical out-of-bag exposure time tracking. Nitrogen or desiccated cabinet containment is shown as a safe and effective means for long-term storage provided the effects of prior out-of-bag exposure conditions are taken into account. Moisture diffusion analyses coupled with experimental verification studies show that time in storage is as important a variable as floor-life exposure for highly-moisture sensitive devices. Improvements in floor-life survivability can be obtained by a handling procedure that includes cyclic storage in low humidity containment. SMDs that have exceeded their floor-life limits are analyzed for proper baking schedules. Optimized baking schedules can be adopted depending on a knowledge of the exposure conditions and the moisture sensitivity level of the device.
The FINEPLACER® Lambda, a modularly designed bonder, provides a full range of process capabilities and multiple bonding technologies. Read more: http://eu.finetech.de/micro-assembly/products/fineplacerr-lambda.html
TI New and Original LM22674MRX-ADJ/NOPB in Stock ICSOP8,18+ package LM22674MRX-ADJ/NOPB 4.5V to 42V, 500mA SIMPLE SWITCHER® Buck Converter with Precision Enable MSD42SWT1G SOT323 ON 17+ LMR23625CFQDDARQ1 SOIC-8 TI 18+ DRV8701ERGER VQFN24 T
Career Center | singapore, Singapore | Accounting/Finance,Engineering,Purchasing,Quality Control
Requirements: Degree in Mechanical Engineering in both design and construction ( Min 4-5 years of Relvant working experience) Have a good knowledge in rotating equipment such as pumps, compressors, turbines, fans, blowers etc. Familar with the requ
Career Center | BANGALORE, India | Engineering,Maintenance,Production
Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance